Regular analysis can extend the life of both fluid and system. Hydratech’s Fluid Monitoring Program (FMP) is a very straight forward, effective way to proactively monitor closed-loop system condition.
Performance Rating
Summary - Rating: BSuitable for systems where low environmental impact and ecological sustainability is preferred. Slightly more efficient than ECO2 but more expensive per litre.
Efficiency - Rating: CLow Thermal Conductivity and high Viscosity at sub-zero temperatures, results in reduced heat transfer efficiency and increased energy demands.
Antifreeze - Rating: BProvides protection down to -50°C but more volume is required to achieve the same freeze-point protection compared with DTX, IGE and LVF.
Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.
Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for food & beverage processing systems and where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.
Physical Properties
Density:1.02 - 1.26 g/cm³
pH:7.5 - 9.0 depending on inhibitors
Boiling Point:>100°C
Characteristics:a clear, slightly viscous liquid. It is slightly sweet to the taste and has a non-pungent but characteristic aroma.
Available in: 5, 10, 20, 25, 205 & 1000 litre containers and bulk tankers
Mixing Guide
Frost Protection °C
v/v of Coolflow ECO3 %
Refractive Index
-10
25.0
1.36300
-15
32.0
1.37200
-20
38.0
1.37800
-25
43.0
1.38400
-30
48.0
1.38900
-35
52.0
1.39400
