Regular analysis can extend the life of both fluid and system. Hydratech’s Fluid Monitoring Program (FMP) is a very straight forward, effective way to proactively monitor closed-loop system condition.
Performance Rating
Summary - Rating: BSuitable for geothermal, GSHP and air-source systems where low environmental impact and ecological sustainability is preferred. Average efficiency but lower in cost compared with MPG based fluids.
Efficiency - Rating: CAverage thermal conductivity and high viscosity at sub-zero temperatures, results in lower heat transfer efficiency and increased energy demands when compared with DTX and ITF.
Antifreeze - Rating: BProvides protection down to -50°C but more volume is required to achieve the same freeze-point protection compared with DTX and ITF.
Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.
Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.
Physical Properties
Density:1.02 - 1.26 g/cm³
pH:7.5 - 9.0 depending on inhibitors
Boiling Point:>100°C
Characteristics:a clear, slightly viscous liquid. It is slightly sweet to the taste and has a non-pungent but characteristic aroma.
Available in: 5, 10, 20, 25, 205 & 1000 litre containers and bulk tankers
Mixing Guide
Frost Protection °C
v/v of Thermox FXC2 %
Refractive Index
-10
25.0
1.35750
-15
32.0
1.36450
-20
38.0
1.37000
-25
43.0
1.37450
-30
48.0
1.37900
-35
52.0
1.38250
