Regular analysis can extend the life of both fluid and system. Hydratech’s Fluid Monitoring Program (FMP) is a very straight forward, effective way to proactively monitor closed-loop system condition.
Performance Rating
Summary - Rating: ASuitable for food & beverage process cooling and other applications where a non-toxic classification is preferred. High efficiency and more cost effective than MPG based coolants.
Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and reduced energy demands.
Antifreeze - Rating: AProvides protection down to -50°C and lower concentration (% volume) is required to achieve the same freeze-point protection, when compared with NTP, USP, ECO2 and ECO3.
Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.
Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for food & beverage processing systems and where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.
Physical Properties
Density:1.10 - 1.15g/cm³ depending on inhibitors
pH:7.5 - 9.0 depending on inhibitors
Boiling Point:>100°C
Characteristics:a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma
Available in: 5, 10, 20, 25, 205 & 1000 litre containers and bulk tankers
Mixing Guide
Frost Protection °C
v/v of Coolflow DTX™ %
Refractive Index
-10
22.0
1.35590
-15
28.0
1.36240
-20
33.0
1.36780
-25
38.0
1.37310
-30
42.0
1.37740
-35
46.0
1.38160
-40
50.0
1.38570
-45
52.0
1.38770
-50
54.3
1.39000
